BMSGK - BURKEPOXY MV SETTING AGENT

  • MSDS: BMSGK
  • Manufacturer: BURKE CO
  • Product Name: BURKEPOXY MV SETTING AGENT
  • National Stock Number: 8040-00N028210
Product Identification

Product ID:BURKEPOXY MV SETTING AGENT
MSDS Date:12/01/1989
FSC:8040
NIIN:00N028210
Kit Part:Y
MSDS Number: BMSGK

Responsible Party
BURKE CO
2655 CAMPUS DR
SAN MATEO, CA 94402
US

Emergency Phone: 213-834-3401/415-349-7600

Info Phone: 213-834-3401/415-349-7600

Preparer: HOWARD UYENO

Cage: 0KM49

Contractor
BURKE CO
SAN MATEO, CA 94403 US

Telephone: 415-349-7600

Cage: 0KM49

Ingredients

1,2-ETHANEDIAMINE, N-(2-AMINOETHYL)-N'-

CAS: 112-57-2

RTECS: KH8585000

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY CAUSE BURNS TO SKIN AND
EYES. CHRONIC: ASTHMA AND SKIN SENSITIZATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOT KNOWN.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR AND ADMINISTER OXYGEN IF
NECESSARY. EYES: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES
AND GET MEDICAL ATTENTION. SKIN: WASH WITH SOAP AND WATER. LAUNDER
CLOTHING BEFO RE RE-USE. INGEST: DO NOT INDUCE VOMITING. GET
MEDICAL ATTENTION IMMEDIATELY.

Fire Fighting

Flash Point Method:PMCC
Flash Point:200F,93C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. TOXIC FUMES WILL BE EVOLVED WHEN THIS MATERIAL IS INVOLVED IN A
FIRE. COOL FIRE-EXPOS CNTNRS WITH WATER.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:SALVAGE FREE LIQUID WITH SHOVEL. BROADACST
ABSORBENT MATERIAL AND PLACE IN A SEALED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A COOL DRY PLACE WITH
ADEQUATE VENTILATION.
Other Precautions:RE-SEAL PARTLY USED CONTAINER. PREVENT ALL SKIN AND
EYE CONTACT. AVOID BREATHING VAPORS.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORY PROTECTION IS
REQUIRED.
Ventilation:LOCAL EXHAUST AND MECHANICAL IS RECOMMENDED.
Protective Gloves:NEOPRENE OR RUBBER GLOVES.
Eye Protection:CHEM WORK GOG/FULL LGTH FSHLD .
Other Protective Equipment:FURTHER SAFETY EQUIPMENT NECESSARY TO
PREVENT CONTACT WITH MATERIAL. EMERGENCY EYEWASH AND DELUGE SHOWER
.
Work Hygienic Practices:WASH HANDS BEFORE HANDLING FOOD.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:C2
Spec Gravity:0.95 (H*2O=1)
Appearance and Odor:BLACK LIQUID; AMINE ODOR

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONT W/STRONG OXIDIZING AGENTS, MINERAL ACIDS (E.G. H*2SO*4, HCL)
& EPOXY RESINS UNDER UNCONTROLLED CONDITIONS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN.

Disposal

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE I/A/W FEDERAL,
STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.